Filter
Top Products
11
Magazine
Cleaning the Throat Assembly
The magazine throat assembly aphoto can be
disassembled for cleaning.
• Remove the two screws beside the top and bottom
corners of the pressure plate aphoto.
• Open the take-up side door and fully loosen the screw
between the two sprocket rollers aphoto.
• Flip the magazine over so the screw drops out of
engagement with the pressure plate assembly. The
screw is captive so it will not fall out and get lost
aphoto.
• Pull out the pressure plate assembly aphoto.
• Clean the lm running surfaces aphoto and guide
rollers aphoto with a brush.
• Put the pressure plate assembly back in place. (It ts
accurately on dowel pins).
• Ret and tighten the two screws.
Maintenance
screw
screw
sprockets
running surfaces
pressure plate assembly