5.1 Battery NC 24/7 R
The battery NC 24/7 R has a capacity of 7 ampere-hours.
• Ensure that the main switch on the camera is off.
• Plug the battery cable KC-20-S or the spiral battery
cable KC-29-S into the power supply socket on the
camera and into the battery socket.
Note: If the battery voltage is too low, the “bat”
symbol will show in the camera display.
5.2 Charger NCL 24 R
Charge the NC 24/7 R battery with this charger.
• First check whether the correct mains voltage is set on
the charger.
• Connect the charger to the mains supply.
• Plug the charger cable into the battery socket.
• Press the start button.
Indication of the LEDs
LED Indication
yellow discharging (1A)
red charging
green charger connected to the mains
PowerSupply