Filter
Top Products
.Magazine
Only the SHM-3 416 Shoulder Magazine 120/400 can
be used with the ARRIFLEX 416. Magazines from the
16 SR 1, 2 & 3 cameras are not compatible.
6.1 Loading the 416 Magazine
Loading the magazine should be practised in daylight with
a piece of waste lm until the procedure can be carried out
condently in a darkroom or lm changing tent.
Cutting the lm through the middle of the perforation holes
simplies the loading process considerably. The lm head
of a fresh roll of lm is normally cut in this way.
Step 1: The Feed Side
Load the lm into the feed side in absolute darkness
(darkroom or lm changing tent).
• Remove the loop protector and lay the magazine on a
at surface with its feed side door facing upwards.
• To open the door, ip up the locking grip, depress the
safety catch and turn it counter-clockwise aphoto.
• Lift up the magazine cover and remove it by pulling the
cover to the right.
locking grip
Magazine
safety catchloop protector