ARRI 416 Film Camera User Manual


 
1
10.4.13 VITC Line Menu
The IVS can convert the timecode, which can also be
displayed man-readable in the video image, into machine
readable VITC (Vertical Interval Time-Code) and place it
in non visible video lines.
Note: The timecode count that is used (“lm related“ or
“video related timecode“) depends on the
settings of the line “Frame Counter“ in the sub
menu “Timecode“ (see chapter 10.4.10).
Note: VITC is only output if timecode is actually
recorded on lm. If no timecode is recorded on
lm for example because the camera is not
running at a timecode speed, no VITC is available.
Note: The White Line has priority over VITC lines. If
the same line is selected for White Line as well
as for VITC, White Line will appear.
Enter the VITC Line Menu from the Main Menu.
Changes made to settings are immediately activated.
Check all settings on a correctly adjusted monitor.
MENU VITC LINE
-> - VITC LINE ON
- POSITION 1 10
- POSITION 2 12
- EXIT
A1
Video-Ait-Sytem