Filter
Top Products
11
Removing the Split Bridge Plate
from the Base Plate
• Before removing the camera, make sure that all cables
are disconnected and that the eyepiece levelling rod is
detached.
• For fast removal of the bridge plate from the base
plate, loosen the sled clamping lever aphoto, push in
the stop pin aphoto and then pull the camera with
the Sled aphoto from the base plate.
sled
release catch
Intallation
accessory carrier
clamping lever
Removing the Camera from the Tripod
for Hand-held Operation
• Before removing the camera, make sure that all cables
are disconnected and that the eyepiece levelling rod is
detached.
• For fast removal of the camera from the tripod for
hand-held operation, loosen the accessory carrier
clamping lever aphoto, push in the release catch
aphoto and then pull the camera with the Accessory
Carrier aphoto away from the Sled.
stop pin
sled clamping lever