Filter
Top Products
Using the on-screen menu
Please see chapter 10.4 Inserter Facilities for basics on
the On-Screen display.
The manual gain control can be programmed via the on-
screen menu as well as control via keypad,. Manual gain
control can be switched on or off. If it is on, values can be
set between 0 (low gain) and 63 (high gain).
• Enter the main menu by pressing the Enter/Insert key
Ñ for more than 3 seconds.
Go to sub menu WB/GAIN/COLOR BARS. Move the
cursor > with the keys Ê and Ë to the line –
MANUAL GAIN. Pressing the key Í or Ì will switch
manual gain control off and on. If manual gain control
is on, the display will change. A line symbol – appears
before VALUE indicating that the gain can be changed
manually.
The LED in the keypad will follow the changes which are
made in this menu and vice versa, if this setting is changed
via the keypad, the on-screen menu will follow.
Video-Ait-Sytem
MENU WB/GAIN/BARS
- WHITE BALANCE MAN
- AUTOADJUST
- RED 30
- BLUE 39
-> - MANUAL GAIN OFF
VALUE
- COLOR BARS OFF
- EXIT
MENU WB/GAIN/BARS
- WHITE BALANCE MAN
- AUTOADJUST
- RED 30
- BLUE 39
-> - MANUAL GAIN ON
- VALUE 40
- COLOR BARS OFF
- EXIT