Main Features
• Integrated into the camera body
Instead of a bulky add-on, the video assist is integrated
into the camera without additional cabling.
• High sensitivity
A high-speed lens with an aperture of 1 : 2.0 and one
of the most sensitive CCD Chips available on the market
combine to provide an excellent color video image in
editing quality even when the lighting is set for high-
speed lm stock that will be pushed during processing.
• High resolution
The design of the new IVS optics was based around
the ARRIFLEX 416 viewnder and results in an image
quality which cannot be attained by add-on solutions.
• Flicker free
An integrated digital frame store enables the video
camera to be synchronized to the lm camera‘s mirror
shutter and provides a icker free video image from 1 fps
(in manual gain control mode) up to maximum speed
because the video image is always taken at the ideal
position of the mirror shutter. Flicker free can be switched
off to bypass the digital frame store and to have
minimal delay in the video system.
• Full white balance control
In addition to the standard indoor white balance setting
of 3200 K, an outdoor setting of 5600 K and an
automatic adjustment, the red and blue channels can
be ne tuned for manual white balance. The 416 IVS
also includes a one push white key.
• Line Interpolation
Resolution is improved in camera “RUN“ mode by using
line interpolation. This results in an image approaching
eld resolution.
• Store and recall settings
All settings can be stored and recalled. This allows you
to adjust all the settings for indoor shooting, store them,
shoot some exterior scenes, then go back indoors and
recall the previous settings.
Up to 6 settings can be stored.
• Integrated frame line inserter
Frame lines can be electronically added to the video
image. This ensures that the lines are visible even in
difcult conditions. The area outside the frame lines
can be darkened electronically in 4 different steps to
emphasize the important image area.
Video-Ait-Sytem