Filter
Top Products
Optic
.Optic
8.1 Lenses
All ARRIFLEX lenses with a PL-mount can be used. Lenses
with a Ø 41 mm standard or bayonet mount can be used
with a suitable adapter. Heavy and long lenses, such as
zoom lenses, must be supported at all times.
Attaching Lenses
• Remove the protective cap from the lens mount receptacle
by turning the lens lock ring aphoto counter-clockwise
(as viewed from in front of the camera) as far as it will
go and then pulling out the protective cap.
Never put your ngers into the lens mount
receptacle.
• Push the lens into the lens mount receptacle without
catching it at the edges. One of the four slots on the
lens mount must t over the index pin aphoto.
• Press the lens at onto the lens mount receptacle and
turn the lens lock ring clockwise to tighten.
Note: The camera is permanently set in Super 16
conguration.
index pin
lens ring