ARRI 416 Film Camera User Manual


 

Setting the Low Battery warning level (Mode 3)
When the 416 is not powered by an OBB-2, it is possible
to set the threshold at which the Low Battery warning is
triggered. It can be set anywhere between 20.0 and 29.9
volts.
Change from Mode 1 to Mode 3 by pressing the
“MODE” button twice.
Press the “SET“ button. The currently set Low Battery
warning level is displayed for 3 seconds.
To change the level, press the “SEL“ button 3 times to
select the 2nd voltage digit or 4 times to select the 3rd
voltage digit. The selected digit will blink.
Adjust the blinking digit with the “SET“ button.
Once the 2nd and 3rd voltage digits are set as
required, press the “SEL“ button once to exit the
adjustment mode.
CameraOperation
MODE button SEL / SET buttons