ARRI 416 Film Camera User Manual


 
11
To switch between clean video and video with data,
use the on-screen program mode. Enter the main menu
by pressing the Enter/Insert key Ñ for more than 3
seconds. Go to sub menu VIDEO/TEXT ADJUST. The
menu line Y/C DATA, which can only be reached if
BNC OUT is on Y/C, switches between clean video
and video with data on the Y/C signal. The line displays
Y/C DATA ON or OFF.
See chapter 10.4 Inserter Facilities for information on
the on-screen program mode.
In the clean video output almost no electronic information
is inserted. Only a rolling bar at the lower left corner of
the video image indicates the lm camera is running.
In the video with data output, additional data such as
format marks or camera status information can be inserted.
An adapter cable from the two BNC connectors to a
standard Y/C connector is included in the IVS package
on initial delivery. Connect the red end to the È/C
output and the white end to the É/Y socket aphoto.
Video-Ait-Sytem
MENU VIDEO/TEXT ADJUST
- FLICKERFREE ON
- LINE INTERP. ON
- SHARPNESS 2
- BNC OUT Y/C
-> - Y/C DATA ON
- GENLOCK OFF
- MINI MON DATA ON
- TXT WHITE LEV. 2
- TXT INVERS OFF
- TXT FINE POS. 2
- EXIT