Filter
Top Products
VB-C60 Viewer
3-25
You can configure the settings related to exposure operations.
1 Exposure Mode
Select from “Auto”, “Manual”, “Auto (Flickerless)” or “Auto (Shutter Speed)”.
When using the camera while setting “Day/Night” to “Auto” in the “Camera” menu in the setting
page (➞ P.1-16), use “Auto”, “Auto (Flickerless)” or “Auto (Shutter Speed)”.
For more information on the setting items in the Exposure Mode, see “Setting Page” (➞ P.1-
14).
2 Exposure Compensation
When the Exposure Mode is set to “Auto”, “Auto (Flickerless)” or “Auto (Shutter Speed)”, you
can select the exposure compensation value in 7 levels (-3 - +3).
When you want to make an image darker, select a negative value. Otherwise, select a positive
value.
3 Metering Mode
When the Exposure Mode is set to “Auto”, “Auto (Flickerless)” or “Auto (Shutter Speed)”,
select the metering mode from “Center-Weighted”, “Average” or “Spot”.
Center-Weighted
This mode meters the light in the entire screen, but especially the center of the screen is
weighted. Even when there is a certain degree of brightness or darkness in the edges of the
screen, an appropriate exposure can be achieved for the subject in the center.
Select this mode when the subject is located around the center.
Average
This mode meters the light in the entire screen uniformly an average.
You can obtain a stable exposure even in an environment where the gap between brightness
and darkness in the screen is significant.
Select this mode to stabilize exposure in situations, for example, where there is car traffic
or people entering and exiting.
Set the Exposure
Operation and Setting as Administrator
1
2
3
4