Filter
Top Products
1-31
Detailed Settings
Set Image Buffering, Motion Detection, Audio Playback, Interval Timer (Event)
Tip
● The following events can be a trigger in motion detection.
• ON Event
• OFF Event
• Continuous Motion (Time of motion detection)
Following functions can be set when the above items are set to “Enable”.
• Upload
• E-mail notification
Settings for upload and e-mail notification are available in the following setting
menu.
• Upload : “Upload” ➞ “General Upload” submenu
➞ “HTTP Upload” submenu or “FTP Upload” submenu
• E-mail Notification: “Upload” ➞ “E-mail Notification” submenu
When image upload is set to enable in “Upload”, images are uploaded according
to the settings of the “Image Buffer” submenu in “Event”.
Even when neither image upload nor e-mail notification is set to be activated for
motion detection events, the following function is available as long as “Motion
Detection Event” is set to “Enable”.
• Notification of event to clients
Whether to enable or disable audio playback can be specified for each of ON
event and OFF event.
● For notes on motion detection use, refer to Start Guide P.xiv.
Note
The motion detection and external device output functions cannot be used together.
!0 Volume
Set the volume for playing a specified sound clip between 1 and 100. The higher the value, the
louder the volume.
!1 Automatic Tracking at ON Event
Select whether to automatically change the camera direction toward a subject during detecting
motion (=ON event). Specify “Enable” so that the camera automatically changes its direction
toward a moving subject while the camera is detecting the motion.
!2 Maximum Tracking Time (sec.)
Set the time to continue automatic tracking.