Filter
Top Products
1-10
▼SNMP
1 SNMP
Select from “Disable” and “Enable”. Specify “Enable” if you need to reference camera’s
information from the SNMP manager.
2 Community Name
Enter the SNMP community name. For security reason, it is recommended to change the
default community name.
3 Administrator Contact Information
Enter the contact information of camera’s administrator, such as an e-mail address. The entered
information can be checked from the SNMP manager.
4 Administration Function Name
Enter the camera name used for administration. The entered name can be checked from the
SNMP manager. When it is blank, default value “VB-C60” is used.
5 Installation Location
Enter camera’s location information. The entered information can be checked from the SNMP
manager.
Set Administrator Password, LAN, IPv6 and DNS (Network)
Tip
● The camera’s information is read-only from the SNMP Manager.
● Use the SNMP Manager in SNMP MIB2 (RFC1213 compatible).
1
3
4
5
2