Filter
Top Products
5-6
Log Message List
VB-C60 Log Messages
Log messages are divided into the following 6 categories.
■ Application Messages (Camera)
Classification Level Code Error level
alert Error 5xx Hardware level failure (system operation stops)
crit Error 4xx Software level failure (task operation stops)
err Error 3xx A failure affecting camera operation (task continues)
warning Warning 2xx A failure not affecting the camera operation
notice Warning 1xx A failure external to the system
info Information 0xx Information regarding normal operation
Message %1%2 host=<host>, user=<user>, prio=<priority>
%1 W: WebView session, V: Sessionless Video Client,
N: Sessionless Event Client
%2 +: Connect, -: Disconnect
Explanation The camera server client has been connected or disconnected.
●A030 WebView Livescope client start and stop
Message %1 host=<host>, user=<user>, video=<jpg | mp4>:<number of frames>
%1 W: WebView session, V: Sessionless Video Client
●A031 Image data transmission quantity
●A101 Invalid user name
Message user <user name> not found
Explanation Access was made by an unauthorized user.
●A102 Invalid password
Message user <user name> password mismatch
Explanation The password is invalid.
●A111 Invalid host
Message host <IP address> access denied
Explanation Access was made by a prohibited host.
●A160 Pan/tilt sub system recover
Message <pan | tilt> recovered
Explanation The pan/tilt subsystem being stopped has recovered.
Remark Refer to A460.