Filter
Top Products
1-25
Detailed Settings
6 Authentication
Select the mail authentication method from “None”, “POP before SMTP” and “SMTP-AUTH”,
according to the authentication method of the destination SMTP server.
User Name, Password, POP Server
When the mail authentication method is set to “POP before SMTP”, enter the user name
and password required for authentication, and the POP server’s host name or IP address.
User Name, Password
When the mail authentication method is set to “SMTP-AUTH”, enter the user name and
password required for authentication.
Set HTTP Upload, FTP Upload and E-mail Notification (Upload)
7 Subject
Enter a subject for e-mail notification (using up to 31 characters).
8 Message Body
Enter the message (text) of e-mail (using up to 255 characters), using interpreted sequences
(%) (➞ P.5-2).
9 E-mail Notification Test
Click “Exec” to perform an e-mail notification test to check if e-mail notification is properly
carried out according to your settings.