Filter
Top Products
1-5
Detailed Settings
Access the Setting Menu
■ Apply Changes
When you change the settings on each setting page, the grayed-out “OK” button on the top right
of the page changes to blue.
Click “OK” to enable the changes.
Click “Clear” to reset the changes.
■ Setting Items That Require Reboot
An orange mark is indicated for each setting item that requires rebooting the camera to enable the
change.
When you change a setting item with the orange mark, the “OK” button displayed on the top right
of the setting page changes to “OK and Reboot”.
Click “OK and Reboot” to enable the change. The setting changes and then the camera reboots.
Click “Clear” to reset the changes.
Common Items
Tip
● A dialog box appears to alert when clicking “OK” or “OK and Reboot” after changing
the network setting, in which the currently-used browser becomes unable to access
to the camera.
● If the above network setting is changed and so the viewer cannot reconnect to the
camera automatically, links to candidate URIs are displayed. However, you may
not be able to connect using the URI, as these are just candidate URIs. In such
case, try connecting from VB Initial Setup Tool.