Filter
Top Products
1-7
Detailed Settings
▼Administrator Password
1 Password
Set the administrator password. Up to 8 alphanumeric characters (including spaces and
printable characters) can be used. The factory default setting is “VB-C60”. Be sure to disconnect
the Admin viewer or VBAdmin Tools from the camera before changing the password.
2 Confirm Password
Enter the same password as above for confirmation.
Set Administrator Password, LAN, IPv6 and DNS (Network)
You can configure following settings.
● Administrator Password
Setting the administrator password.
● LAN
Setting for items required for LAN connection such as IP address.
● IPv6
Setting for IPv6.
● DNS
Setting for the name server address, host name and DDNS.
● SNMP
Setting for SNMP.
Note
● For system security, make sure to change the administrator password, and not to
forget the new password.
● If you forget the password, press the camera’s reset switch to restore the factory
default setting (➞ P.5-15). However, note that all settings will be restored to
the factory default settings.
1
2