Filter
Top Products
2-29
VBAdmin Tools
Motion Detection Setting Tool
1. Start Motion Detection Setting Tool
The Motion Detection Setting Tool window is displayed
(“Motion Detection Tool Display Screen” (→ P.2-28)).
Settings for motion detection are available in the
Setting tab on the right side of the screen. There are
two setting tabs available: “Camera” tab and “Area”
tab.
2. Set the frame rate and camera direction
(“Camera” tab → P.2-30)
3. Set the detection area (“Area” tab → P.2-31)
4. Set the conditions to judge of motion detection at what degree of change in
video, motion is detected (“Area” tab → P.2-31)
5. Save the settings
■ Motion Detection Settings Procedure
This section briefly describes the of motion detection setting procedure. For more details of settings,
refer to each reference page.
Tip
● Video is displayed in 160x120 and black and white in the viewer of Motion Detection
Setting Tool, regardless of settings of the camera.
● In the “Area” tab, you can set the conditions to judge the timing of motion detection
with viewing the video from the camera. For information on the display screen, see
““Detected” status and Screen Display” (→ P.2-34). In the “Video” tab, you can set
the conditions of judgment with viewing video recorded in “Live” tab (→ P.2-35).
● Motion Detection function
• When setting for motion detection, be sure to test the actual performance and
check if it properly detects motion.
• Please note that motion detection may not work properly when capturing rapidly
moving subjects or in dark conditions.
• Motion detection may wrongly detect motion because of light, wind or other
changes in the subject.
9 Setting tab (Camera/Area)
● Camera tab
Set the frame rate and preset position (→ P.2-30).
● Area tab
Select the area for which the motion detection is enabled and set the sensitivity, size and
duration for each area. For detailed information on the screen display and how to operate
them, see P.2-31.
0 Display motion detection status of the camera
Check the checkbox to display the motion detection status. You can check if the setting values
are valid for the camera (→ P.2-32).