Filter
Top Products
NOTE: For additional information about the ink system, see Handle the ink system on page 55.
Task 4: Handle print jobs
After checking ink consumables and paper levels, you can send the job to the printer. On the screen preview,
make adjustments for paper type, print size, number of copies and nesting as necessary. You can then move
the job to the RIP queue.
The table below identifies sections of this user’s guide which will help you to quickly find information on
handling print jobs.
Table A-3 Handle print jobs
Task Elements See this section of the user’s guide
Submit a job See
Create a print job on page 82
Check ink and paper usage for a job See
Check ink and paper usage for a job on page 122
Cancel a job See
Delete a job from the queue on page 118
Manage the print queue See
Job queue management on page 115
Troubleshooting See this section of the guide
I can't access the Embedded Web Server See
Cannot access the Embedded Web Server on page 181
NOTE: To improve color consistency between prints or from one printer to another, consider performing a
color calibration. For more information on color calibration, for the Z6800 see
Color calibration on page 101,
and for the Z6600 see
Color calibration on page 105.
Task 5: Adjust printed images
Check the quality of the prints. The table below identifies sections of this user’s guide which will help you to
quickly find information on adjusting printed images.
Table A-4 Handle the ink system
Task Elements See this section of the user’s guide
Select print quality See
Select print quality on page 83
Select paper size See
Select paper size on page 85
Select margins options See
Select margins options on page 86
Rescale a print See
Rescale a print on page 87
Change the treatment of overlapping lines See
Change the treatment of overlapping lines on page 88
Print in grayscale See
Print in gray shades on page 91
Print crop lines See
Print crop lines on page 89
Rotate or autorotate an image See
Rotate an image on page 89 and Autorotate on page 90
Select the color emulation mode See
Color emulation modes on page 112
ENWW Task 4: Handle print jobs 193