Filter
Top Products
4. Push down as indicated by the arrow.
CAUTION: You might feel some resistance when installing the new printhead, so you need to press it
down firmly but smoothly. You should hear a beep and see confirmation on the front-panel display that
the printhead has been inserted. If you have difficulty, see
Cannot insert a printhead on page 174.
5. Insert all of the other printheads that need to be installed, and close the carriage cover.
6. Make sure that the end of the blue handle catches the wire loop on the near side of the carriage.
66 Chapter 5 Handle the ink system ENWW