Filter
Top Products
Change the language of the front-panel display
There are two possible ways to change the language of the front-panel menus and messages.
●
If you can understand the current front-panel display language, select the Setup menu icon
, then
Front panel options > Select language.
●
If you cannot understand the current front-panel display language, start with the printer powered off.
At the front panel, press the OK key and hold it down. While holding the OK key down, press the Power
key and hold it down. Continue to hold down both keys until the green light on the right side of the
front-panel display starts flashing, and then release both keys. You can expect a delay of about one
second. If the green light starts flashing without any delay, you may need to start again.
Whichever method you used, the language selection menu should now appear on the front-panel display.
Highlight your preferred language with the Up and Down keys, then press the OK key.
When you have selected your preferred language, turn off the printer with the Power key and then turn it on
again. The front panel will appear in the selected language.
Access the Embedded Web Server
The Embedded Web Server enables you to manage your printer remotely using an ordinary Web browser
running on any computer.
To access the Embedded Web Server directly, you must have a TCP/IP connection to your printer. However,
you can access the Embedded Web Server indirectly through the HP Designjet Utility.
The following browsers are known to be compatible with the Embedded Web Server:
●
Internet Explorer 6 and later, for Windows
●
Safari 2 and later, for Mac OS X 10.4
●
Firefox 1.5 and later
To access the Embedded Web Server on any computer, open your Web browser and give the IP address of
your printer.
You can see your printer's IP address (192.168.1.1 in this example) on the front panel.
If you have followed these instructions but failed to get through to the Embedded Web Server, see Cannot
access the Embedded Web Server on page 181.
Change the language of the Embedded Web Server
The Embedded Web Server can work in the following languages: English, Portuguese, Spanish, Catalan,
French, Italian, German, Russian, Simplified Chinese, Traditional Chinese, Korean and Japanese. It uses
18 Chapter 3 Personalize the printer ENWW