Filter
Top Products
You have various other options available from the Connectivity menu icon.
●
Jetdirect EIO: view information, configure and reset the Jetdirect connection
●
Advanced > Select I/O timeout: specify the number of seconds that an idle connection is allowed to
remain open, 270 is the default value, if set to zero, the timeout is disabled
●
Advanced > Allow SNMP: specify whether SNMP is permitted
●
Advanced > Embedded Web Server > Allow EWS: specify whether the Embedded Web Server is enabled
●
Advanced > Web Services > HP Designjet Utility software: view the HP Designjet Utility software
settings
●
Advanced > Web Services > Color and paper management: view the color and paper management
settings
Change the graphic language setting
You can change the graphic language setting from the HP Designjet Utility with the following steps.
1. Under Windows, select the Admin tab then Printer settings > Printing preferences.
Under Mac OS X, select Printer settings > Printing preferences.
2. Select one of the following options.
●
Select Automatic to let the printer determine which type of file it is receiving. This is the default
setting; it works for most software applications. You should not normally need to change it.
●
Select HP-GL/2 only if you are sending a file of that type directly to the printer, without going
through a printer driver.
●
Select PDF only if you are sending a file of that type directly to the printer, without going through a
printer driver (with the PostScript/PDF upgrade).
●
Select PostScript only if you are sending a file of that type directly to the printer, without going
through a printer driver (with the PostScript/PDF upgrade).
●
Select TIFF only if you are sending a file of that type directly to the printer, without going through
a printer driver.
●
Select JPEG only if you are sending a file of that type directly to the printer, without going through
a printer driver.
You can change the graphic language setting from the front panel. Select the Setup menu icon
, then
Printing preferences > Select graphic language. Select the desired option and press the OK key to set the
value.
NOTE: If the graphic language is set from the HP Designjet Utility, it overrides the front panel setting.
Personalize the list of paper types
If there are some paper types that you never use, you can remove them from the list shown in the front
panel, the Embedded Web Server and the HP Designjet Utility.
ENWW Change the graphic language setting 21