Filter
Top Products
7. Put the blue hub on to the upper end of the spindle, and push it towards the end of the roll as shown in
step 1 in the following image. Then slide the lever-lock to the locked position as shown in step 2.
8. With the blue hub on the left, insert the spindle into the left side of the printer (1), and then into the
right side of the printer (2).
9. Close the spindle lock on the right-hand side.
If you regularly use different paper types, you can change rolls more quickly if you pre-load rolls of different
paper types on different spindles. Extra spindles are available for purchase.
Load a roll into the printer
NOTE: To start this procedure, you need to have a roll loaded on the spindle. See Load a roll onto the
spindle on page 31.
1.
At the printer's front panel, select the
icon, and then select Paper load > Load roll.
Alternatively, you can start loading paper without using the front panel, by feeding paper in or lifting
the pinch lever when there is no paper loaded.
NOTE: If you lift the pinch lever, you will need to align the paper manually; follow the instructions on
the front panel.
2. If printing paper info is disabled, the front panel asks you to select the paper type.
3. The front panel asks you to feed paper. When the printer detects the paper, paper checks will begin.
ENWW Load a roll into the printer 33