Filter
Top Products
Create a print job
In order to print something, you must send it to the printer. This constitutes a print job, which is entered into
the printer's print queue. There are two main ways of sending a print job to the printer:
●
To print directly from a program, use the program's Print command as usual. When you select your
printer, the printer driver is invoked to send your job to the printer.
●
If you have a file that is already in a supported graphical format, you can use the Embedded Web Server
to send it directly to the printer without going through a printer driver (see below).
Using the Embedded Web Server to print files
From the HP Designjet Utility or the Embedded Web Server, select Submit Job in the Job Center group. You
will see the window below.
Press the Add files button to choose the files from your computer that you want to print. The files must be in
one of the following formats:
●
PDF*
●
PostScript*
●
TIFF*
●
JPEG*
●
HP-GL/2
●
CALS/G4
*Only supported when PS/PDF Upgrade Kit is installed.
NOTE: When you print to a file, the file should be in one of the above formats, but its name may have an
extension such as .plt or .prn.
82 Chapter 6 Print options ENWW