Filter
Top Products
NOTE: If you have disabled skew checking, the paper length is estimated as four times the width.
TIP: If your document is 330 × 483 mm (13 × 19 in), designed to fit on sheet paper of the same size, select
the document size Super B/A3.
Custom paper sizes
To choose a non-standard paper size not shown in the list of paper sizes:
●
Under Windows, there are two different ways:
◦
In the driver dialog, press the Custom button in the Paper/Quality tab, then specify the name and
the dimensions of your new paper size, then click Save to save your new paper size. In the
PostScript driver, to see your new custom size in the list of custom sizes, you need to exit the
printer properties, then reenter them (and use the More button if necessary).
NOTE: The driver will not allow you to create a paper size whose width exceeds its length.
◦
From the Start menu, select Printers, then from the File menu select Server Properties. In the
Forms tab, check the Create a new form box, specify the name and dimensions of the new form,
then click Save Form.
NOTE: Such forms are not available when using a shared printer that is connected to a different
computer.
●
In the Mac OS X Page Setup dialog: select Paper Size > Manage Custom Sizes.
NOTE: If your application offers no Page Setup dialog, please use the Print dialog.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Paper > Page size >
Custom.
Select margins options
By default, the printer leaves a 5 mm (0.2 in) margin between the edges of your image and the edges of the
paper. However, you can change this behavior in several ways.
●
In the Windows driver dialog: select the Paper/Quality tab and then the Margins/Layout button.
TIP: In the Windows PostScript driver, make sure you have made the right choice from the Document
size list. You should select a 'no margins' document size if you intend to use the Oversize or Clip
Contents By Margins options.
●
In the Mac OS X Print dialog: select the Margins/Layout panel.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Paper > Layout/
Margins.
You will then see at least some of the following options.
NOTE: Under Mac OS X, the available margins options depend on the paper size selected in the Page Setup
dialog.
86 Chapter 6 Print options ENWW