Filter
Top Products
101
Adjustments and Settings for Recording : Handling data
Adjustments and Settings for Recording
13
Press the JOG dial button.
The following message is displayed.
14
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial
button.
The current white shading correction value, the flare
compensation value, and the RB gain offset correction
value are stored in the built-in memory of the unit.
Note
The values will not be stored in the unit’s internal memory
if another menu screen is selected without executing
WRITE or if the menu is exited.
15
Press the MENU button.
The setting menu is cleared, and the displays showing
the unit’s current statuses appear at the top and bottom
of the viewfinder screen.
1 Using menu operations, open the <LENS
FILE> screen from the FILE page.
2 Turn the JOG dial button to move the arrow
(cursor) to the FILE NO. item.
3 Press the JOG dial button and the file number
will flash. Turn the JOG dial button to select
the file (1 to 8) to be read.
4 Press the JOG dial button to enter the file
number.
5 Turn the JOG dial button to move the arrow
(cursor) to the READ item.
6 When the JOG dial button is pressed, the
following message appears.
7 Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial
button.
The recorded correction values for the white shading,
flare, and RB gain offset are read.
8 Press the MENU button.
The setting menu is cleared, and the displays showing
the unit’s current statuses appear at the top and bottom
of the viewfinder screen.
WRITE?
YES
#
NO
To read the lens file from the builtin memory
< LENS FILE >
#
FILE NO. :1
READ
WRITE
RESET ALL
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
< LENS FILE >
FILE NO. :1
#
READ
WRITE
RESET ALL
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
READ?
YES
#
NO
AJ-HPX3100G(VQT3A79)_E.book 101 ページ ２０１０年９月１７日 金曜日 午後９時２１分