Filter
Top Products
114
Preparation: Preparing for Audio Input
Take the following steps to prepare the camera for connecting audio input devices.
AJ-HPX3100 can be equipped with the AJ-MC900G stereo
microphone kit (an extra-cost option).
1 Open the microphone holder.
2 Mount the microphone and tighten the
clamping screw.
The microphone must be attached with the UP mark on
the microphone facing up.
3 Connect the microphone cable to the MIC IN
jack on the camera.
4 Set the AUDIO IN switch to [FRONT]
depending on the audio channel to be
recorded.
1 Remove the cover to insert the wireless
receiver and secure it with the screws.
2 Set the AUDIO IN switch to [W.L.] depending
on the audio channel to be recorded.
3 When using a 2-channel wireless receiver,
select “DUAL” in the WIRELESS TYPE menu
item.
The menu item is found in the <MIC/AUDIO> screen
on the MAIN OPERATION page.
Preparing for Audio Input
When Using the Front Microphone
Clamping Screw
MIC IN Jack
AUDIO IN
Switch
When Using a Wireless Receiver
When Using the Unislot Wireless Receiver
AJ-HPX3100G(VQT3A79)_E.book 114 ページ ２０１０年９月１７日 金曜日 午後９時２１分