Filter
Top Products
27
Parts and their Functions: Warning and Status Display Functions
Parts and their Functions
1. Back tally lamp
When the 2.BACK TALLY switch is set to [ON], the lamp
behaves in the same way as the front tally lamp at the
viewfinder.
2. BACK TALLY switch
This switch controls the action of the 1.back and 7.rear
tally lamps.
ON: Back and rear tally lamps enabled.
OFF: Back and rear tally lamps disabled.
3. WARNING lamp
This lamp starts blinking or lights up if something
unusual occurs in the memory.
4. USB lamp
Stays on when the camera-recorder is in USB mode.
5. LIGHT button
Use this button to control illumination of the display
window.
Alternately pressing this button toggles illumination of
the 6.Display window on or off.
6. Display window
This window displays warnings, battery-remaining level,
sound volume, time data, and other information.
Note
When the battery is installed, the camera-recorder
indicates the data even if the power is turned off. To turn
off the data indications to keep the battery from being
discharged, specify OFF for the menu item P. OFF LCD
DISPLAY. The menu item P. OFF LCD DISPLAY is found in
the <TC/UB> screen on the MAIN OPERATION page.
7. Rear tally lamp
When the 2.BACK TALLY switch is set on [ON], the rear
tally lamp behaves in the same way as the back tally
lamp.
Warning and Status Display Functions
7
1
2
3
6
5
4
AJ-HPX3100G(VQT3A79)_E.book 27 ページ ２０１０年９月１７日 金曜日 午後９時２１分