Filter
Top Products
43
Recording and Playback: ONE CLIP REC Function
Recording and Playback
zThe INTERVAL REC and LOOP REC functions cannot be
used at the same time.
zThis mode does not operate when the REC SIGNAL item
is set to “SDI”. The menu item REC SIGNAL is found in
the <SYSTEM MODE> screen on the SYSTEM SETTING
page.
zThe menu and thumbnail operations are restricted as
follows when combining to the clip. Press and hold the
STOP button for about 2 seconds to stop combining to the
clip when switching to this mode.
The following menu items cannot be changed.
SYSTEM MODE, REC SIGNAL, REC FORMAT,
CAMERA MODE, AUDIO SMPL RES, PC MODE,
25M REC CH SEL
The following Menu items, related to the reading/
writing of the SD memory card and reading of the
settings file, cannot be executed.
SD CARD READ/WRITE, LENS FILE CARD R/W,
READ USER DATA, READ FACTORY DATA,
Reading SCENE FILE, CAC FILE CARD READ
Selecting the OPERATION > COPY menu option of
the thumbnail menu does not work.
zThe processing time to complete the recording may take a
little more time than normally to allow the clip to be
combined with subsequent recordings.
zThe fade process does not work on discontinuous audio
during playback where the recordings are combined within
the clip.
zIf non-linear editing software is used on clips with multiple
combined recordings, the software may not operate
normally (present as of Oct 2010).
Refer to the P2 support page from the following web site
for the most recent information on software that has been
confirmed to work with these types of clips.
http://pro-av.panasonic.net/
Precautions when in ONE CLIP REC mode
AJ-HPX3100G(VQT3A79)_E.book 43 ページ ２０１０年９月１７日 金曜日 午後９時２１分