Filter
Top Products
87
Adjustments and Settings for Recording : Adjusting and setting the LCD monitor
Adjustments and Settings for Recording
1 Turn on the POWER switch of the unit.
2 Slide the OPEN button in the arrow 1
direction to open the LCD monitor in the arrow
2 direction.
3 Adjust the angle of the LCD monitor for most
convenient viewing.
The monitor can turn up to 180 degrees towards the
lens and up to 90 degrees towards you.
Note
To prevent camera-recorder failure, do not allow undue
force to be applied to the monitor (when it is open).
4 The options BRIGHTNESS, COLOR LEVEL,
and CONTRAST show respectively the
brightness, color level and contrast of the
screen.
These menu items are found in the <LCD MONITOR>
screen on the SYSTEM SETTING page.
5 Through the menu option VF/LCD CHAR,
specify whether or not the LCD should display
the same characters as the viewfinder.
The menu item VF/LCD CHAR is found in the
<OUTPUT SEL> screen on the SYSTEM SETTING
page.
Notes
z When closing the LCD monitor make sure that it is shut
tight.
z In an environment with sudden temperature changes,
condensation may form on the liquid crystal surface of
the monitor. If this happens, wipe off the moisture with
a soft, dry cloth.
z When the camera-recorder is very cold, the video image
in the LCD monitor will appear slightly darker
immediately after the power is turned on. Once the
interior of the camera-recorder warms up, the LCD
monitor delivers normal brightness.
When shooting with the LCD display angled 180 degrees
towards the lens, you can set the menu item SELF SHOOT
to “MIRROR”, to horizontally flip the video image on the LCD
display, and allow you to view a mirror image while shooting.
Note that only the video image on the LCD monitor is
horizontally flipped, not the actual video being recorded.
The menu item SELF SHOOT is found in the <LCD
MONITOR> screen on the SYSTEM SETTING page.
Note
When the LCD monitor is angled 180 degrees towards you with
the menu option SELF SHOOT to “MIRROR”, the LCD monitor
does not provide the same status indication as the viewfinder,
regardless of the setting for the menu option VF/LCD CHAR.
Adjusting and setting the LCD monitor
Using the LCD Monitor
#
<LCD MONITOR>
BRIGHTNESS :+0
COLOR LEVEL :+0
CONTRAST :+0
BACKLIGHT :NORMAL
SELF SHOOT :MIRROR
Self-portrait Shooting
<OUTPUT SEL>
OUTPUT ITEM :MENU ONLY
SDI OUT MODE :MEM
SDI OUT CHAR :ON
MONITOR OUT :VBS
MONITOR OUT MODE:MEM
#
VF/LCD CHAR :ON
VF MODE :MEM
THUMBNAIL OUT :OFF
AJ-HPX3100G(VQT3A79)_E.book 87 ページ ２０１０年９月１７日 金曜日 午後９時２１分