Filter
Top Products
192
Menu: Menu Description Tables
Note
Please refer to [Setting UMID Information] (page 73) for the
UMID information setting.
Items/
Data Saved
Adjustable
Range
Remarks
VITC UB
MODE
USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
Select the user bits mode for VITC.
USER/EXT:
If UB MODE is set to EXT, the EXT
value is recorded. If not, USER value
set by UB is recorded.
TIME: Select local time (hours, minutes,
seconds).
DATE: Select local date and time (2 last
digits of year, month, date, time).
TCG: TCG value enters UB.
FRM RATE:
Select camera shoting information
(frame rate, etc.). For more
information, see [Frame rate
information recorded in user bits] (page
64).
REGEN
: Read out value stored in card
and record value continuously.
Note
When the camera-recorder operates in
24P, 24PA, 30P (AVC-I) or 25P (AVC-I)
mode, FRM RATE is always selected.
–CUF–
TCG SET
HOLD
ON
OFF
ON/OFF switching for the feature that
always starts recording (when the power
is turned ON again) the TCG value that
was set before the power is turned OFF.
–CUF–
FIRST REC TC PRESET
REGEN
For the first recording after the power is
turned on, a P2 card is inserted and then
switching from this P2 card to another
recording-target P2 card is performed,
select whether or not to regenerate the
time code as the value on the new P2
card.
PRESET:
Use the camera-recorder’s internal
time code.
REGEN:
For clips recorded on the recording-
target P2 card, regenerate the time
code as the time code of the clip that
has the most recent date and time.
Notes
z Set the date and time accurately. For
guidance on setting, see [Setting the
Internal Clock’s Date and Time] (page
66).
z During operation in either 24P or 24PA
mode, regeneration of the value of the
card recorded in drop-frame is not
permitted.
–CUF–
P.OFF LCD
DISPLAY
ON
OFF
Select whether or not to display the time
code setting and counter indication on the
LCD monitor when the power is turned
OFF.
ON: Display setting and indication while
the power is turned OFF.
OFF:Power-down LCD monitor while
camera power is turned OFF.
Setting and indication disabled.
–CUF–
TC OUT TCG
TCG/TCR
Select the time code to be output to the
time code output connector.
TCG:Always output time code generator
value.
TCG/TCR:
Display time code generator value
in recording mode, and time code
reader value in playback mode.
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
TC DISP SEL 30F
24F
Select the display format for the time
code frame digits. (For 1080-59.94i or
480-59.94i only) For details, refer to
[Recording time code and user bits] (page
63).
30F: Display time code frame digits in 30
frames.
24F: Convert time code frame digits into
24 frames for display.
–CUF–
TC VIDEO
SYNCHRO
0
1
2
3
For setting to correct the time code
according to the delay of video signals.
0: Do not correct.
1: To delay the time code to be input
according to the timing of the video
images.
2: To forward the time code to be output
according to the timing of the video
images.
3: To delay the time code to be input and
forward the time code to be output,
respectively, according to the timing of
the video images.
For details, refer to [Externally Locking
the Time Code] (page 68).
–CUF–
REC REVIEW
REGEN
ON
OFF
For selecting whether the time code is
regenerated to the value on the P2 card
or not, when subsequent recording starts
after setting the RET SW item on the SW
MODE screen to R.REVIEW and
pressing the RET button on the lens or
the USER button on the unit on which the
RET SW function is assigned.
ON: The time code is regenerated.
OFF: The time code is not regenerated.
–CUF–
UMID SET/INFO
Items/
Data Saved
Adjustable
Range
Remarks
COUNTRY NO-INFO
Input the user’s country. NO-INFO is
displayed until the input completes.
–CUF–
ORGANIZATION
NO-INFO
Input the user’s organisation or company
name. NO-INFO is displayed until the
input completes.
–CUF–
USER NO-INFO
Input the user name. NO-INFO is
displayed until the input completes.
–CUF–
DEVICE NODE
Indicate the product ID number.
–––––
AJ-HPX3100G(VQT3A79)_E.book 192 ページ ２０１０年９月１７日 金曜日 午後９時２１分