Filter
Top Products
105
Adjustments and Settings for Recording : Chromatic Aberration Compensation (CAC)
Adjustments and Settings for Recording
1 Insert the SD memory card with the CAC FILE
downloaded from our support website.
For downloading, refer to the following URL.
http://pro-av.panasonic.net/
2 Open the <CAC FILE CARD READ> screen
from the FILE page via the menu operation.
3 Select “TITLE READ” using the JOG dial
button and then press the JOG dial button.
The lens product number is indicated in the TITLE
column.
4 Select CARD FILE SELECT using the JOG dial
button and then press the JOG dial button.
5 Select the TITLE NO to be read and press the
JOG dial button.
6 Select READ using the JOG dial button and
then press the JOG dial button.
The following screen is displayed.
7 Select YES using the JOG dial button and then
press the JOG dial button.
The CAC FILE for the lens selected in step 4 is
recorded in memory on the unit.
If “EMPTY” is selected in MEM STORE NO: EMPTY/1/
2 --- at this time, data are recorded in available space of
the CAC FILE numbers on the unit. If “1” is selected,
the data will overwrite the contents of CAC FILE No. 1.
If the following messages are displayed when the JOG
dial button is pressed, the data cannot be read out.
8 To store multiple CAC files in the unit, repeat
Steps 3 to 7.
9 To close the menu operation, press the MENU
button.
The setting menu disappears, and the current state of
the unit is displayed.
Note
The unit is capable of recording 32 CAC files. When the CAC
FILE is full, delete any of the CAC Files.
To read the CAC FILE from an SD memory card
#
< CAC FILE CARD READ >
CARD FILE SELECT:1
READ
DELETE
TITLE READ
TITLE SCROLL :01
01:HA22X7.8BERM-M58
02:HA16X6.3BERM-M58
03:HJ17EX7.6B IASE
04:HJ22EX7.6B IASE
05:NO FILE
06:NO FILE
07:NO FILE
08:NO FILE
FILE READ?
#
YES
NO(CANCEL)
MEM STORE NO. :EMPTY
TITLE SCROLL :01
01:HA22X7.8BERM-M58
02:HA16X6.3BERM-M58
03:HJ17EX7.6B IASE
04:HJ22EX7.6B IASE
05:NO FILE
06:NO FILE
07:NO FILE
08:NO FILE
Error message Measures
READ NG
NO CARD
(No SD memory card is inserted)
Insert an SD memory card.
READ NG
NO FILE
(No file is available)
Select a file containing data and
perform the read operation
again.
READ NG
ERROR
(Data cannot be read out)
Insert an SD memory card
again, and then perform the read
operation again.
READ NG
CANNOT ACCESS
(It is impossible to access the
data)
It is impossible to access the SD
memory card while the card is in
use. After completion of the
respective operations, perform
the read operation again.
READ NG
FILE DATA INVALID
(File data are abnormal)
The written file data have errors.
Use the proper file data.
READ NG
FILE MEMORY FULL
(Memory is full)
The memory card is full, and
new data cannot be written on it.
Delete unnecessary CAC data
and then perform the read
operation again
AJ-HPX3100G(VQT3A79)_E.book 105 ページ ２０１０年９月１７日 金曜日 午後９時２１分