Filter
Top Products
168
Menu: Menu Description Tables
GENLOCK
Items/
Data Saved
Adjustable
Range
Remarks
GENLOCK INT
GL IN
SDI IN
Switch the camera synchronising signal.
INT: Synchronise with the internal
reference signal regardless of the
reference signal input to the
GENLOCK IN or SDI IN
connector.
GL IN: synchronizes with the reference
signal input into the GENLOCK
IN connector.
SDI IN: synchronizes with the reference
signal input into the SDI IN
connector.
Note
If “SDI is set for the REC SIGNAL item in
the <SYSTEM MODE> screen, then this
will synchronize with the reference signal
input into the SDI IN connector
regardless of this setting.
–CUFR
GL PHASE
HD SDI
COMPOSIT
For selecting the output signals that lock
phases to the signals that are input in the
GENLOCK IN connector. (Only for 1080-
59.94i, 1080-50i)
HD SDI:
For locking the HD SDI signals to the
GENLOCK input.
For the down converter output signals,
the start position of the video delays by
about 90 lines.
COMPOSIT:
For locking the down converter output
signals to the GENLOCK input.
For the HD SDI output signals, the start
position of the video gains by about 90
lines.
–CUFR
H PHASE
COARSE
–100
:
+000
:
+100
Perform coarse phase adjustment for
horizontal hold when configuring a
system.
–––––
H PHASE FINE –100
:
+000
:
+100
Perform fine phase adjustment for
horizontal hold when configuring a
system.
–––––
RETURN
SIGNAL
HD SDI
HD-Y
Select the return video displayed on the
viewfinder and LCD monitor during HD
mode.
HD SDI:
Displays the HD SDI input signal input
to the SDI IN connector.
HD-Y:
Displays the HD-Y signal input to the
GENLOCK IN connector.
Note
In SD mode, this item is not displayed.
–CUFR
AJ-HPX3100G(VQT3A79)_E.book 168 ページ ２０１０年９月１７日 金曜日 午後９時２１分