Filter
Top Products
162
Menu: Menu Description Tables
The ____ in the Adjustable Range column indicates the preset mode.
Menu Description Tables
SYSTEM SETTING
SYSTEM MODE
Items/
Data Saved
Adjustable
Range
Remarks
SYSTEM
MODE
1080-59.94i
1080-50i
480-59.94i
576-50i
For setting the system frequency and the
recording format of the unit.
When this item is switched, turn “OFF” the
POWER switch on the unit and then turn
it “ON” again.
Notes
z When the remote control unit (AJ-
RC10G) or the extension control unit
(AG-EC4G) is connected, this item is
not displayed.
To switch this item, operate the main
unit independently.
z When the time code is in free run mode
and a change is made to the SYSTEM
MODE menu option, the time may not
be correctly recorded. After turning on
the camera-recorder, check the time
code and make a change to the setting
if required.
z When USB DEVICE mode is selected,
no change can be made to this option.
–CUF–
REC SIGNAL CAM
SDI
Select video input signals.
CAM
:
Record the signal from the camera
SDI: Records input to the SDI IN
connector.
Notes
z After the power has been turned OFF,
this setting defaults to CAM when the
power is turned ON again.
z If “SDI” is selected, then this will be
recorded at 60i or 50i regardless of
settings in the REC FORMAT item.
–CUF–
REC FORMAT 1080-59.94i:
DVCPROHD/60i
AVC-I100/60i
AVC-I100/30PN
AVC-I100/24PN
AVC-I50/60i
AVC-I50/30PN
AVC-I50/24PN
1080-50i:
DVCPROHD/50i
AVC-I100/50i
AVC-I100/25PN
AVC-I50/50i
AVC-I50/25PN
480-59.94i:
DVCPRO50/60i
DVCPRO/60i
DV/60i
576-50i:
DVCPRO50/50i
DVCPRO/50i
DV/50i
Select the recording codec and recording
mode.
DVCPRO HD:
Recorded using the DVCPRO HD
codec. In the CAMERA MODE item,
further shooting modes can be
selected.
AVC-I 100:
AVC-I 50:
Recorded using the AVC-Intra100 or
AVC-Intra50 codecs. With these
AVC-Intra codecs, recording from
60i, 50i, 30PN, 24PN, and 25PN
(Native recording) can be selected.
DVCPRO50:
DVCPRO:
DV:
These are the codecs that can be
selected in SD mode. In the
CAMERA MODE item, further
shooting modes can be selected.
–CUFR
Items/
Data Saved
Adjustable
Range
Remarks
CAMERA
MODE
(1080-59.94i
/480-59.94i)
60i
30P
24P
24PA
(1080-50i
/576-50i)
50i
25P
For setting the video system for shooting.
Note
In AVC-Intra mode, 24PA cannot be
selected.
–CUFR
ASPECT 16:9
4:3
Select the aspect ratio for recording. (In
SD mode only.
16:9: Record in <16:9> aspect ratio.
4:3: Record in <4:3> aspect ratio.
–CUFR
SCAN
REVERSE
OFF
ON
Specify whether image correction is used
or not, when an anamorphic lens or a
lens for film applications is used.
OFF: Images are not corrected.
ON: Images are corrected. The vertical
and horizontal orientations are
inverted.
–CUFR
SETUP
0%
7.5%A
Switch the setup. (For 480-59.94i only
0%:
Setup is switched to 0% for both the
camera output and the recording.
7.5%A
: Setup is switched to 7.5% for the
camera output and 0% for the
recording.
–CUFR
AUDIO SMPL
RES
16BIT
24BIT
Select the bit-rate for the recorded audio.
(Only when using the AVC-Intra codec)
16BIT: Records in 16-bit.
24BIT: Records in 24-bit.
Notes
z Playback clips recorded in 24 bits on a
24 bit compatible P2 device or with a
P2 Viewer. Clip number is displayed in
red and cannot be played on P2
devices that are not 24 bit compatible.
Audio is not played back correctly on
P2 Viewers that are not 24 bit
compatible. Please use the latest
version of the P2 Viewer.
z For the latest information on 24 bit
compatible P2 devices and the P2
Viewer, see the support page for P2 at
the following Website.
http://pro-av.panasonic.net/
–CUFR
AJ-HPX3100G(VQT3A79)_E.book 162 ページ ２０１０年９月１７日 金曜日 午後９時２１分