Filter
Top Products
180
Menu: Menu Description Tables
Items/
Data Saved
Adjustable
Range
Remarks
SAVE LED OFF
P2CARD
Set the SAVE lamp function.
OFF:
The lamp always stays off and not
used.
P2CARD:
The lamp blinks in synch with the
warning message when the P2 card’s
remaining recording capacity is getting
low.
–CUFR
REC STATUS ON
OFF
Select whether or not to enable “REC”
indication in the viewfinder and on the
LCD monitor during recording.
ON: REC indication enabled.
OFF:REC indication not enabled.
Note
Even if this item is “OFF”, the “REC”
indicator will be shown if “CHA” is
selected in the REC TALLY item in the
<OPTION MODE> screen
–CUFR
P-REC/i-REC ON
OFF
Switches the display ON/OFF for
INTERVAL REC and PRE RECORDING.
ON: Flash the status of i-REC
(INTERVAL REC), 1-CLIP (ONE
CLIP REC) and P-REC (access
connection status).
OFF: Do not flash the status of i-REC, 1-
CLIP, and P-REC. Pull the
MARKER SEL, MODE CHK /
MENU CANCEL switch to check
the status of i-REC and 1-CLIP.
Note
PRE RECORDING switch information
and START/END information of ONE
CLIP REC are displayed without being
configured in the menu settings.
–CUFR
MODE CHECK IND
Items/
Data Saved
Adjustable
Range
Remarks
STATUS ON
OFF
For the setting to display the status
screen when the MARKER SEL, MODE
CHK / MENU CANCEL switch is pulled.
–CUFR
!LED ON
OFF
For the setting to indicate causes for
turning on the lamp on the viewfinder is
displayed when the MARKER SEL,
MODE CHK / MENU CANCEL switch is
pulled.
The causes for turning on the lamp are
displayed with .
–CUFR
FUNCTION ON
OFF
For the setting to display the FUNCTION
screen when the MARKER SEL, MODE
CHK / MENU CANCEL switch is pulled.
–CUFR
AUDIO ON
OFF
For the setting to display the AUDIO
screen when the MARKER SEL, MODE
CHK / MENU CANCEL switch is pulled.
–CUFR
CAC ON
OFF
The setting to display the CAC screen
when the MARKER SEL, MODE CHK /
MENU CANCEL switch is pulled.
–CUFR
!
Items/
Data Saved
Adjustable
Range
Remarks
USER SW
STATUS
ON
OFF
Set whether to display the functions
assigned to each user switch when the
MARKER SEL, MODE CHK / MENU
CANCEL switch is pulled.
–CUFR
P.ON IND ON
OFF
For the setting to display the status
screen immediately after turning on the
power of the unit.
Note
Even if it is set to “ON” in this item, the
status screen is not displayed
immediately after turning on the power of
the unit when the STATUS item is set to
OFF.
–CUFR
!LED
Items/
Data Saved
Adjustable
Range
Remarks
GAIN(0dB) ON
OFF
For the setting to turn the lamp on the
viewfinder on when the GAIN is set to a
value other than 0 dB.
–CUFR
DS.GAIN ON
OFF
For the setting to turn the lamp on the
viewfinder on when the DS. GAIN
(cumulative gain) is activated.
–CUFR
SHUTTER ON
OFF
For the setting to turn the lamp on the
viewfinder on when the electronic shutter
is activated.
–CUFR
WHITE
PRESET
ON
OFF
For the setting to turn the lamp on the
viewfinder on when the WHITE BAL
switch is set to the PRST position.
–CUFR
EXTENDER ON
OFF
For the setting to turn the lamp on the
viewfinder on when the lens extender is
activated.
–CUFR
B.GAMMA ON
OFF
For the setting to turn the lamp on the
viewfinder on when the BLACK GAMMA
is activated.
–CUFR
MATRIX ON
OFF
For the setting to turn the lamp on the
viewfinder on when the color correction
table for the linear matrix is selected.
–CUFR
COLOR
CORRECTION
ON
OFF
For the setting to turn the lamp on the
viewfinder on when the 12-axis
independent color correction is selected.
–CUFR
FILTER ON
OFF
For the setting to turn the lamp on the
viewfinder on when the filter combination
is anyone other than 3200K and CLEAR.
–CUFR
ATW ON
OFF
For the setting to turn the lamp on the
viewfinder on when the ATW (Auto
tracking white balance) is activated.
–CUFR
AJ-HPX3100G(VQT3A79)_E.book 180 ページ ２０１０年９月１７日 金曜日 午後９時２１分