Filter
Top Products
177
Menu: Menu Description Tables
Menu
The ____ in the Adjustable Range column indicates the preset mode.
ZEBRA Pattern Display
VF
VF DISPLAY
Items/
Data Saved
Adjustable
Range
Remarks
DISP
CONDITION
NORMAL
HOLD
NORMAL: Display status constantly.
HOLD: Display status only when the
MARKER SEL, MODE CHK /
MENU CANCEL switch is
pulled.
–CUFR
DISP MODE 1
2
3
Set the DISP MODE.
Switch the camera’s Warning/Message
indication. Please refer to [Display Modes
and Setting Changes/adjustment Result
Messages] (page 85) for more
information.
–CUFR
VF OUT Y
NAM
R
G
B
For selecting the video signals to display
in the viewfinder screen.
Y: Brightness signal
NAM: Output signal with the highest level
among R, G, and B signals.
R: Rch signal
G: Gch signal
B: Bch signal
–CUFR
VF DTL 00
:
05
:
10
For setting the detail level of the
viewfinder screen.
The details of the signals for the
viewfinder are further enhanced. If 00 is
selected, then the detail is the same as
that for the main line.
–CUFR
ZEBRA1
DETECT
0%
:
70%
:
109%
Set the ZEBRA1 detection level (IRE
value).
–CUFR
ZEBRA2
DETECT
0%
:
85%
:
109%
Set the ZEBRA2 detection level (IRE
value).
–CUFR
ZEBRA2 ON
SPOT
OFF
Set the ZEBRA2 to ON, OFF, or SPOT.
–CUFR
LOW LIGHT
LVL
OFF
10%
15%
20%
25%
30%
35%
Set the camera incoming light volume at
which to display LOW LIGHT.
–CUFR
RC MENU
DISP.
ON
OFF
For the setting to display the menu in the
viewfinder screen when the remote
control unit or the extension control unit is
connected to the unit.
–CUFR
MARKER
CHAR LVL
50%
60%
70%
80%
90%
100%
Adjust the brightness of markers and
characters displayed on the VF.
–CUFR
SYNCHRO
SCAN DISP.
sec
deg
For setting the unit to indicate SYNCHRO
SCAN mode.
sec: indicates time
deg: indicates the opening angle of the
shutter.
–CUFR
SPOTOFFON
109%
0%
ZEBRA 2
DETECT
ZEBRA 2
ZEBRA 1
DETECT
Video Level
AJ-HPX3100G(VQT3A79)_E.book 177 ページ ２０１０年９月１７日 金曜日 午後９時２１分