Filter
Top Products
189
Menu: Menu Description Tables
Menu
Note
When “CH3/4” is selected in the VR SELECT item, the following 6
items will also be swapped for channels 1/2 and 3/4. The channel
indicated in parentheses ( ) indicates the channels used during
replacement. Furthermore, settings values from menu items are
inherited between these channels.
FRONT VR CH1 > (CH3)
FRONT VR CH2 > (CH4)
AUTO LEVEL CH3 > (CH1)
AUTO LEVEL CH4 > (CH2)
LVL CONTROL CH3 > (CH1)
LVL CONTROL CH4 > (CH2)
> [Recording level adjustment] (page 58)
MIC/AUDIO (1/3)
Items/
Data Saved
Adjustable
Range
Remarks
VR SELECT CH1/2
CH3/4
Select the channels to assign to the
AUDIO LEVEL controls and F.AUDIO
LEVEL control.
CH1/2: Assign level adjustments for
channels 1/2. Adjust channel 3/4
automatically, or through the LVL
CONTROL CH3 and LVL
CONTROL CH4 items in the
menu.
CH3/4: Assign level adjustments for
channels 3/4. Adjust channel 1/2
automatically, or through the LVL
CONTROL CH1 and LVL
CONTROL CH2 items in the
menu.
–CUF–
FRONT VR
CH1 (CH3)
OFF
FRONT
W.L.
REAR
ALL
Select whether or not to enable the
F.AUDIO LEVEL control for the signal
selected as the input signal to AUDIO
CH1 (CH3).
OFF: Disabled for any input selected.
Recording level does not change
by turning the volume control.
FRONT
: Only enabled when FRONT is
selected.
W.L.: Only enabled when the wireless
mic receiver is selected.
REAR: Only enabled when REAR is
selected.
ALL: Enabled for any input selected.
–CUF–
FRONT VR
CH2 (CH4)
OFF
FRONT
W.L.
REAR
ALL
Select whether or not to enable the
F.AUDIO LEVEL control for the signal
selected as an input signal to AUDIO
CH2 (CH4).
OFF: Disabled for any input selected.
Recording level does not change
by turning the volume control.
FRONT
: Only enabled when FRONT is
selected.
W.L.: Only enabled when the wireless
mic receiver is selected.
REAR: Only enabled when REAR is
selected.
ALL: Enabled for any input selected.
–CUF–
AUTO LVL CH3
(CH1)
ON
OFF
Select whether to use automatic
adjustment for the audio CH3 (CH1) level
adjustment method.
ON: Enables automatic adjustment.
OFF: Disables automatic adjustment. In
these cases, adjust using the LVL
CONTROL CH3 (CH1) item in the
menu
–CUF–
AUTO LVL CH4
(CH2)
ON
OFF
Select whether to use automatic
adjustment for the audio CH4 (CH2) level
adjustment method.
ON: Enables automatic adjustment.
OFF: Disables automatic adjustment. In
these cases, adjust using the LVL
CONTROL CH4 (CH2) item in the
menu
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
LVL CONTROL
CH3 (CH1)
000
:
070
:
100
When the audio CH3 (CH1) level
automatic adjustment is “OFF”, this item
can be manually adjusted.
–CUF–
LVL CONTROL
CH4 (CH2)
000
:
070
:
100
When the audio CH4 (CH2) level
automatic adjustment is “OFF”, this item
can be manually adjusted.
–CUF–
REAR XLR
AUTO CH1/2
ON
OFF
Set to apply to CH1 and CH2 the function
to automatically detect whether a
connector is connected to the rear
AUDIO IN connector XLR.
ON: Automatically detects. When
connected to the rear AUDIO IN
CH1/3 connector, CH1 will
automatically be selected for the
rear, and when connected to the
AUDlO IN CH2/4 connector, CH2
will automatically be selected for
the rear.
OFF: Disables automatic detection.
–CUF–
REAR XLR
AUTO CH3/4
ON
OFF
Set to apply to CH3 and CH4 the function
to automatically detect whether a
connector is connected to the rear
AUDIO IN connector XLR.
ON: Automatically detects. When
connected to the rear AUDIO IN
CH1/3 connector, CH3 will
automatically be selected for the
rear, and when connected to the
AUDlO IN CH2/4 connector, CH4
will automatically be selected for
the rear.
OFF: Disables automatic detection.
–CUF–
AJ-HPX3100G(VQT3A79)_E.book 189 ページ ２０１０年９月１７日 金曜日 午後９時２１分