Filter
Top Products
32
Recording and Playback: P2 Cards
Note
When using the camera-recorder for the first time, be sure to
set the time data beforehand.
> On how the time data is set, see [Setting Time Data] (page 62).
1 Turn on the POWER switch.
2 Open the card slot cover.
3 Insert a P2 card into the P2 card slot until the
EJECT button pops up.
4 Push the eject button that pops up to the right.
Insert a P2 card into camera-recorder. The P2 CARD
ACCESS LED for the appropriate slot indicates the
status of the P2 card.
>[P2 CARD ACCESS LED and Status of P2 cards]
(page 33).
5 Close the slot cover.
Notes
z To prevent cards from falling out, dust from entering
and reduce the risk of exposure to static electricity,
close the card slot cover before moving the camera.
z Format P2 cards only on a P2 card device.
Inserting P2 Cards
POWER: ON
Card slot cover
EJECT button
Insert the card
with the logo
facing up.
P2 CARD
ACCESS
LED
Recording and Playback
P2 Cards
AJ-HPX3100G(VQT3A79)_E.book 32 ページ ２０１０年９月１７日 金曜日 午後９時２１分