Filter
Top Products
81
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Adjustments and Settings for Recording
Information Item Indication Status
20. WHITE BAL switch
position
A
B
P
T
WHITE BAL switch positioned at [A].
WHITE BAL switch positioned at [B].
WHITE BAL switch positioned at [PRST].
ATW mode is set. However it flashes when intensity and color are outside the
operation range
21. Stored gain indication 6:/10:/12:/15:/20:/24:/
28:/34:
Storage gain (DS.GAIN) value (when active)
22. Gain value ¢¢dB Current gain value.
23. Audio input channel
and level meter
- - - - - - - - +
F
W
R
Selected channel together with its audio level.
AUDIO IN switch is positioned at FRONT.
AUDIO IN switch is positioned at W.L.(WIRELESS)
AUDIO IN switch is positioned at REAR.
24. Super iris ON S Super iris ON.
25. Iris override
indication
+ +
+
– –
–
(No indication)
Correction phase of the iris override (when active)
+ + : On the open side by 1 +: On the open side by 0.5
– – : On the closed side by 1 –: On the closed side by 0.5
No indication : Standard status
26. Super black ON B Super black ON.
Note
This is displayed when “S+IRIS” or “S” is selected in the IRIS menu option.
You can select the IRIS menu option from the <VF INDICATOR> screen of the
VF page.
27. Iris, F value NC
OPEN
F1.7 - F16
CLOSE
Lens cable is not connected.
Lens iris is at maximum.
Lens iris value
Lens iris closed.
Note
These indications are provided when the lens is capable of indicating the iris
value. When the iris is being overridden, they blink.
28. Zoom indication Z00 - Z99 Zoom degree is indicated. This indication is not provided for a lens that does
not return the zoom position, even if the indication is set to ON.
29. INTERVAL REC/PRE
RECORDING
information display
(blink)
(blink) ¢¢h¢¢m/¢¢s
P-REC (blink)
P-REC (lit)
1-CLIP
1¢CLIP
START 1¢CLIP
END 1-CLIP
Displayed before and after operation during INTERVAL REC mode.
Displayed during I
NTERVAL REC operation.
Displays the pause time before the next recording during INTERVAL REC.
Displayed until images/audio are completely recorded to the P2 card after
stopping recording. Do not remove the P2 card or turn the power off until the
flashing display completely turns off.
Note
“P-REC” flashes regardless of the PRE RECORDING function settings.
When the PRE RECORDING function is set to ON, lights when you pull the
MARKER SEL, MODE CHK / MENU CANCEL switch toward you. In addition,
this displays when the mode switches to PRE RECORDING mode by pressing
the PRE REC assigned USER switch.
Displayed when a recording is about to be recorded to a new clip while ONE
CLIP REC mode is on.
Displayed when a recording can be compiled and recorded to the previous clip
while ONE CLIP REC mode is ON.
Note
If the P2 card is removed or the clip is deleted, subsequent recordings are
recorded to a new clip when the previous combined clip does not exist. In
this case, “1
¢CLIP” may remain displayed.
Displayed when recording of a new clip has started in ONE CLIP REC mode.
Displayed when a combined clip is complete in ONE CLIP REC mode.
30. Gamma mode display HD/SD/FLK1/FLK2/FLK3/
FREC/VREC
Gamma mode selected with the GAMMA MODE SEL menu option.
You can select the GAMMA MODE SEL menu option from the <GAMMA>
screen of the PAINT page.
31. ATW lock status ATW LOCK Displayed when the color temperature is fixed by pressing the USER switch to
which the ATW LOCK function is assigned while ATW is operating.
32. Types of markers MKR: A/B/OFF Types of markers currently displayed.
33. Y GET value ¢¢¢.¢% While Y GET is ON, displays output intensity level adjacent to the center
marker as a percentage.
34. Digital zoom DZa2/a3/a4 During digital zoom mode, displays the magnification.
[i]
AJ-HPX3100G(VQT3A79)_E.book 81 ページ ２０１０年９月１７日 金曜日 午後９時２１分