Filter
Top Products
28
Parts and their Functions: Display Window Functions
Error Code Indication
> [Warning System] (page 153)
Display Window Functions
P2 card/battery-remaining level indications
Memory action status indication
LOOP
h
MEDIA
E
F
Y minM
s
frm
13 24
0
D
VTCG
TIME D A T E
P-iREC
SL A V E HOLD W GPS
B A T T
E F
O VE R O VE R
10
OO
40
-dB
30
20
HDV
CTL
NDF
Battery-remaining level indication bar
For a battery with a digital indicator (percentage indication),
if the remaining level of the battery is higher than 70%, all
seven segments up to the “F” position are lit.
When the remaining level falls below 70%, the segments go
out one-by-one for each drop of 10%. All seven segments
can be set to light up when the battery-remaining balance is
100%. To do so select “100%” for the menu item BATT
REMAIN FULL. The menu item BATT REMAIN FULL is
found in the <BATTERY/P2CARD> screen on the MAIN
OPERATION page.
Audio channel level meter
When the MONITOR SELECT CH1/2 / CH3/4 switch is set to
[CH1/2], the meter indicates 1 and 2 as the audio channel
numbers, together with their audio levels. When the switch is
set to [CH3/4], the meter indicates 3 and 4 as the audio
channel numbers, together with their audio levels.
Media-remaining space indication bar
The bar indicates the remaining free space on each P2 card,
using a seven-segment display.
Each segment can represent either three or five minutes of
remaining free space, depending on the value set through the
menu option CARD REMAIN/. According to the set value, the
segments disappear one-by-one. The menu option CARD
REMAIN / can be found in the <BATTERY/P2CARD> screen on
the MAIN OPERATION page.
LOOP
h
MEDIA
E
F
Y minM
s
frm
13 24
0
D
VTCG
TIME D A T E
P-iREC
SL A V E HOLD W GPS
B A T T
E F
O VE R O VE R
10
OO
40
-dB
30
20
HDV
CTL
NDF
Information indication
LOOP:
Stays illuminated in LOOP REC mode.
>
[Loop Recording] (page 39).
LOOP
h
MEDIA
E
F
Y minM
s
frm
13 24
0
D
VTCG
TIME D A T E
P-iREC
SL A V E HOLD W GPS
B A T T
E F
O VE R O VE R
10
OO
40
-dB
30
20
HD V
CTL
NDF
Mode indication
W: Stays illuminated when the camera-recorder operates in
SD mode (480-59.94i, 576-50i) and is set to 16:9 mode.
HD: Stays illuminated when the camera-recorder is in HD
mode (1080i).
DV: Stays illuminated when the recording/playback format is
DV.
GPS: Stays illuminated when radio waves are not received
during GPS operation.
GPS : Stays illuminated when radio waves are received during
GPS operation.
P-REC: Stays illuminated when the PRE REC MODE is set to
ON, and blinks when recording is continued after the
recording tally lamp has gone out. The menu item PRE
REC MODE is found in the <REC FUNCTION> screen
on the SYSTEM SETTING page.
iREC: Remains illuminated during INTERVAL REC mode
recording, and blinks during a pause.
i: Blinks when INTERVAL REC mode is selected.
Time code indication
NDF: Stays illuminated when the time code is in non-drop frame
mode.
DF: Stays illuminated when the time code is in drop frame
mode.
SLAVE
: Stays illuminated when the time code is externally locked.
HOLD: Stays illuminated when the time code generator/reader
value is frozen.
CTL: Stays illuminated when the DISPLAY switch is positioned
at [CTL] to display the CTL count.
TCG: Stays illuminated when the DISPLAY switch is positioned
at [TC] (or [UB]) to display the TC (or UB) generator
value.
TC:
Stays illuminated when the DISPLAY switch is positioned at
[TC] (or [UB]) to display the TC (or UB) reader value.
VTCG: Stays illuminated when the DISPLAY switch is positioned
at [UB] to display the VIUB generator value.
VTC: Stays illuminated when the DISPLAY switch is positioned
at [UB] to display the VIUB reader value.
TIME:
Stays illuminated when the DISPLAY switch is positioned at
[UB] to display the real-time hour, minute and second.
DATE: Stays illuminated when the DISPLAY switch is positioned
at [UB] to display the real-time date.
No Indication:
The CTL, VTCG, TIME, and DATE stay off when the DISPLAY
switch is positioned at [UB] to display real time, time zone, hour
and minute.
Time count indication:
The time code, CTL, user bits and real time are shown.
Note
When the DISPLAY switch is positioned at UB, each press of
the HOLD button changes the indication through VTCG (VTC)
> DATE > TIME > No Indication (Time Zone) > TCG (TC),
in that order.
AJ-HPX3100G(VQT3A79)_E.book 28 ページ ２０１０年９月１７日 金曜日 午後９時２１分