Filter
Top Products
135
Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview
Manipulating Clips with Thumbnails
When “USED” is selected:
1. Write-protect Mark
The mark appears if the P2 card is write-protected.
2. P2 Card Status (used memory capacity)
The used memory capacity of the P2 card is indicated
by a bar graph and a percentage figure. The bar graph
indicator moves to the right as the used memory
capacity increases.
The following indications may appear, depending on the
card status:
FORMAT ERROR:
An unformatted P2 card is inserted.
NOT SUPPORTED:
An unsupported card is inserted in the camera.
NO CARD:
P2 cards are not inserted.
Use the cursor button to place the cursor on the P2 card
for data you want to access and press the SET button to
display detailed information about the P2 card to check
individual information such as the serial number and the
user ID.
3. P2 Card memory capacity/Total Capacity
Displays the used memory capacity on a P2 card and
the total capacity, in minutes. Because fractions are
truncated, the figure shown for used memory capacity
on a P2 card may differ from the figure for total capacity.
The used memory capacity of a write-protected P2 card
is displayed as 100%.
4. Total used memory capacity for all slots
Displays the total used memory capacity for all 2 slots.
5. Warning symbol
When the following P2 card is detected, the symbol is
displayed.
RUN DOWN CARD:
The maximum number of overwrites on the P2 card
has been exceeded.
DIR ENTRY NG CARD:
The directory structure on the P2 card is not
supported.
The warning can be confirmed on the P2 card detailed
information indication in [2.P2 Card Status (used
memory capacity)].
The status display enables a confirmation of the SD memory
card formatted condition, available memory capacity etc.
From the thumbnail menu, select PROPERTY > DEVICES
> SD CARD.
SD STANDARD:
Indicates that an SD memory card is formatted
according to the SD/SDHC standard.
SUPPORTED: Complies with SD/SDHC
NOT SUPPORTED: Does not comply with
SD/SDHC
USED: Used capacity (bytes)
BLANK: Free space (bytes)
TOTAL: Total capacity (bytes)
NUMBER OF CLIPS:
The number of clips on an SD memory card when
clips have been copied to an SD memory card.
PROTECT:
Write protected
1
2
4
3
5
SD memory card Status Display
AJ-HPX3100G(VQT3A79)_E.book 135 ページ ２０１０年９月１７日 金曜日 午後９時２１分