Filter
Top Products
102
Custom Setting Menu—continued
d4: Last frame x 32
At the default setting, film starts to rewind automatically at the end of film
roll. However, this can be changed to start after frame 36 or 35. (Useful in
saving the film negative in 6 strips of 6-frame or 7 strips of 5-frame.)
Options:
End of film: Film starts to rewind at the end of film roll
Frame 36: Film starts to rewind after frame 36
Frame 35: Film starts to rewind after frame 35
d5: MB-40 CH fps x 45, 166
With the Multi Power Battery Pack MB-40 (optional) attached, the maximum
film advance speed in CH (continuous high-speed) is 8 fps. However, this can
be changed to 7 fps or 6 fps.
Options:
8 fps: Maximum film advance speed of 8 fps
7 fps: Maximum film advance speed of 7 fps
6 fps: Maximum film advance speed of 6 fps
d6: DX warning x 23
When film sensitivity is set to s and non-DX-coded film is loaded, a
warning appears when film is advanced to the first frame. However this can
be changed so the warning appears when the power is turned on and
camera back is closed (without advancing the film to the first frame).
Options:
After film load: Non-DX film warning when film is
advanced to the first frame
Always visible: Non-DX film warning when the power is
turned on and camera back is closed (without advancing
the film to the first frame)
• Film advance stops at frame 36 or 35 when “d2; film rewind” (x 101) is set to
“Manual”.
P930_En 04.10.19 7:19 PM Page 102