Filter
Top Products
110
Custom Setting Menu—continued
f5: Buttons & dials x 12
Normally, changes to settings that involve both a command dial and a
button are made by rotating the command dial while the button is held
down. If desired, this can be changed so that the buttons do not have to be
held down for 20 sec. while the command dial is rotated. (Press the button
again or lightly press the shutter release button to cancel the hold.)
Options:
Default: Changes to settings made by rotating command
dial while button is held down
Hold: Settings can be changed by rotating command dial
even after button is released
f4-3: Aperture setting
Options:
Sub-command dial: Aperture can only be adjusted using the
Sub-Command Dial
Aperture ring: Aperture can only be adjusted using the lens’
aperture ring when a non-G-type CPU lens is attached
f4-4: Menus status
Options:
Off: Perform menu operations with multi-selector
On: Perform menu operations with multi-selector and
command dials
• When “On” is selected, the Main-Command Dial operates as P/{ on the multi-
selector and the Sub-Command Dial operates as </>.
• In Programmed Auto or Shutter-Priority Auto exposure modes, aperture cannot be
set with the lens aperture ring even when “Aperture ring” option is selected.
• If “30 s” is selected in “Auto mtr-off”, duration of “hold” becomes approximately
30 sec. (x 100).
P930_En 04.10.19 7:19 PM Page 110