Filter
Top Products
32
9. Rewinding the Film
Always make sure that the film has completely rewound before
removing the film cartridge.
1
Film starts to rewind automatically after the
last shot is taken.
• o––, o–, and then o is displayed in the top
LCD panel and viewfinder while the film is
rewinding. The frame counter counts down
backwards until the rewind is complete. Also,
”Rewinding . . .“ is displayed in the rear LCD
panel.
2
Confirm that E is blinking in the top LCD
panel. Then, open the camera back by lifting
the film rewind knob and remove the film
cartridge.
• Film is completely rewound when the frame
counter shows a blinking E in the top LCD
panel and viewfinder, and “REWIND
COMPLETED” is displayed in the rear LCD
panel. (E appears without blinking in the top
LCD panel, and viewfinder indication and
“REWIND COMPLETED” display in the rear LCD
panel disappear when the exposure meter is
off.) Make sure the film is completely rewound
(E is blinking or “REWIND COMPLETED” is
displayed), then open the camera back away
from sunlight and remove the film cartridge.
P930_En 04.10.19 7:18 PM Page 32