Filter
Top Products
120
Setup Menu [Recording Shooting Data]—continued
Warning indications for memory full setting
When “Stop data rec.” is set at the memory full setting and you reach the
maximum number of film rolls that can be recorded in camera’s memory (x 117),
illustrated warning indications appear and the shutter locks (indications disappear
when exposure meter is off). Take one of the following measures:
• Turn the power switch off once and on again. The shutter lock is released and
pictures can be taken but no shooting data is recorded.
• Delete all shooting data (x 118). The shutter lock is released and pictures can be
taken, and new shooting data is recorded.
• The shutter lock is released and pictures can be taken when shooting data is
copied onto a CompactFlash™ card using optional Data Reader MV-1 (x 166).
Data in the camera’s memory is deleted and new shooting data will be recorded.
(When film is loaded, shooting data of the loaded film is not copied and remains
in the camera’s memory.)
P930_En 04.10.19 7:19 PM Page 120