Filter
Top Products
73
Detailed Operation
Locked exposure area in each metering system
Spot Metering
• In Single Area AF mode (x 52), Dynamic AF mode (x 52) or Manual focus (x
61) with CPU lens:
Exposure at the selected focus area
• In Group Dynamic AF mode (x 52) with CPU lens:
Exposure at the center focus area of the selected focus group
• In Dynamic AF mode with Closest-Subject Priority (x 53), with non-CPU lens is
used (x 39) or when “Other screen” is selected in Custom setting “b6: Screen
comp.” (x 98):
Exposure at the center focus area
Center-Weighted Metering
Exposure at 12mm-diameter circle at center
Available functions in Auto Exposure Lock with each exposure
mode
• ¡ (Programmed Auto): Flexible Program (x 64)
• ™ (Shutter-Priority Auto): Shutter speed adjustment
• £ (Aperture-Priority Auto): Aperture adjustment
In any of these three situations, controlled shutter speed and/or aperture will be
displayed.
Auto Exposure Lock in autofocus operation
• Focus Lock (x 58) is simultaneously activated. Confirm / in the viewfinder.
CSM c1: Auto Exposure Lock can be set to be activated by lightly pressing the
shutter release button (x 99).
CSM c2: Operation when the AE/AF-L button is pressed can be changed as
follows (x 99).
• Only exposure is locked.
• Exposure remains locked until shutter is released, exposure meter turns off or
AE/AF-L button is pressed again.
• Exposure remains locked until exposure meter is off or AE/AF-L button is pressed
again (pressing shutter release button does not release the lock).
• Only focus is locked.
P930_En 04.10.19 7:19 PM Page 73