Filter
Top Products
24
5. Set Focus Mode, AF Area Mode and Focus Area
3
Rotate the multi-selector lock lever to
release the lock and select the center focus
area with the multi-selector.
• Lightly press the shutter release button and
press the multi-selector up/down/right/left to
shift the focus area in your desired direction.
(Press the center of the multi-selector to select
center focus area.)
• The selected focus area will be highlighted in
the rear LCD panel (in normal and detailed
display) and indicated in red in the viewfinder.
1
Set the focus mode selector to S (Single
Servo AF).
• Make sure the focus mode selector clicks
properly into position.
2
Set the AF Area mode selector to g.
• In Single Area AF mode, you can select your
desired focus area from 11 possible choices
(x 52).
In normal display
P930_En 04.10.19 7:18 PM Page 24