Filter
Top Products
Top LCD panel Viewfinder Rear LCD panel
ƒEE blinks ƒEE blinks FEE appears
M appears M appears —
M blinks M blinks —
——
CLOCK HAS BEEN
RESET.
Set time and
date.
∂ appears ∂ appears ∂ appears
Err and E Err and E
FILM LOAD ERROR
blink blink
Err blinks Err blinks DX ERR
E blinks E blinks
REWIND COMPLETED
End blinks End blinks END OF FILM
o–– and o–– and
frame counter frame counter REWINDING...
blink blink
— ? blinks —
176
Cause
• CPU Nikkor lens (other than G-
type) is not set to its minimum
aperture.
• Batteries are nearing exhaustion.
• Batteries are just about
exhausted.
• Built-in clock has been reset.
• EV step difference from the lens’
maximum aperture is displayed.
Non-CPU lens with maximum
aperture not specified is
attached.
• Film does not correctly advance.
• Film speed is set to DX and non-
DX-coded film is loaded.
• Film remains in the camera after
film rewind is complete.
• The end of the film roll has been
reached.
• Batteries are exhausted during
film rewind.
• Autofocus is not possible.
Troubleshooting
P930_En 04.10.19 7:19 PM Page 176