Filter
Top Products
53
• The combination of focus areas in Group Dynamic AF Mode can be changed as
follows in Custom Setting “a3: Group dynamic AF” (x 94):
• Focus area pattern can be changed among six focus area groups—center 1,
center 2, top, bottom, left and right (Pattern 2 Closest, Pattern 2 Center).
• In Pattern 1 Closest and Pattern 2 Closest, Dynamic AF with Closest-Subject
Priority can be performed with focus areas within a group.
Center 1 Top Bottom Left Right
j:Dynamic AF Mode with Closest-Subject Priority
Dynamic AF Mode with Closest-Subject Priority automatically selects the focus
area nearest to the closest subject. Focus is constantly maintained within one of
the 11 focus areas so pictures are always in focus.
• In Single Servo AF with Focus-Priority, the area of the subject in focus is
highlighted momentarily in the viewfinder. If “Focus priority” is selected in
Custom Setting “a1: AF-C priority” (x 94), the area of the subject in focus is
also highlighted even in Release-Priority,
• All focus areas are highlighted with “
.
” in the rear LCD panel (in normal and
detailed displays).
• Focus may not be achieved on the closest subject when a telephoto lens is
used or when the subject is too dark. In these situations, use Single Area AF
Mode.
• Pattern 1 Center (default)
• Press the center of the multi-selector to switch between Center 1 and Center
2. However, if “Center AF area” is not selected in Custom Setting “f1: Center
button” (x 107), Center 1 and Center 2 cannot be switched.
Detailed Operation
Center 1 Top Bottom Left Right
• Pattern 1 Closest
Center 1 Center 2 Top Bottom Left Right
• Pattern 2 Center
Center 1 Center 2 Top Bottom Left Right
• Pattern 2 Closest
P930_En 04.10.19 7:18 PM Page 53