Filter
Top Products
20
3. Mounting a Lens
Nikon recommends using a G- or D-type CPU lens to take full
advantage of the features the camera offers.
1
Turn the power switch off.
• Turn the power switch off before mounting or
detaching lenses.
2
Mount the lens to the camera body.
• Position lens in the camera’s bayonet mount so
that the mounting indexes on the lens and
camera body are aligned, then twist the lens
counterclockwise until it locks into place.
• Be sure not to touch the lens release button.
3
Lock aperture at the minimum setting.
• With a CPU Nikkor lens other than G-type, set
the lens to its minimum aperture (smallest
f/stop) and lock. When a CPU Nikkor lens other
than G-type is not set to its smallest aperture
setting and the power switch is turned on, ƒEE
will blink in the top LCD panel and viewfinder
and the shutter cannot be released.
• G-type Nikkor lenses have no aperture ring.
Unlike other CPU Nikkor lenses, aperture does
not need to be set to minimum.
• Turn the power switch off, push and hold the lens
release button Å, then turn the lens clockwise Í.
1
2
CPU Nikkor lenses have
CPU contacts
D-type Nikkor lensG-type Nikkor lens
• Detaching the lens
P930_En 04.10.19 7:18 PM Page 20